POWERS .27 CALIBER YELLOW STRIP LOAD 100/BX

PART# 50626 The safety strip is molded in a special length to provide a visual indication that the tool is loaded.

POWERS 1-1/2" REBAR BASKET CLIPS (100/BX)

POWERS 1-1/4"DRIVE PIN W/1"WASHER TO 3" W/1"WASHER

PART# FROM 50108, 50110, 50112, 50114, 50116 SIZES FROM 1 1/4", 1 1/2", 2", 2 1/2", 3" 100/BX

POWERS 1" WEDGE ANCHORS (10/BX) VARIOUS SIZES

The Power-Stud+ SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal-weight concrete, structural sand-lightweight concrete and concrete over metal deck. The anchor is manufactured with a zinc plated carbon steel body and expansion clip. Nut and washer are included

POWERS 1/2" DRIVE PIN FOR STEEL

PART# 50012 FOR 1/2" 100/BX

POWERS 1/2" DROP IN ANCHOR

POWERS 1/2" SLEEVE ANCHORS (25/BX) VARIOUS SIZES

The Lok-Bolt AS is an all steel pre-assembled single unit sleeve anchor which can be used in concrete or masonry units. Available in multiple head styles for multiple applications and finished appearance, extension sleeves can be added to create longer lengths.

POWERS 1/2" WEDGE ANCHORS (50/BX) VARIOUS SIZES

The Power-Stud+ SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal-weight concrete, structural sand-lightweight concrete and concrete over metal deck. The anchor is manufactured with a zinc plated carbon steel body and expansion clip. Nut and washer are included

POWERS 1/2" WEDGE BOLT VARIOUS SIZES

PART# 7244SD, 7246SD, 7250SD The Wedge-Bolt® anchor is a one piece heavy duty anchor with a finished hex head. It is easy to identify, removable and vibration-resistant.

POWERS 1/2" X 11" X 16" SPLINE WEDGE-BIT

For proper performance, the Wedge-Bolt anchors must be installed with a Wedge-Bit. The Wedge-Bit has a special matched tolerance range designed to provide optimum performance for the anchor. The available shank styles and sizes are listed in the PDF file below.

POWERS 1/2" X 8" X 10" SDS WEDGE-BIT

For proper performance, the Wedge-Bolt anchors must be installed with a Wedge-Bit. The Wedge-Bit has a special matched tolerance range designed to provide optimum performance for the anchor. The available shank styles and sizes are listed in the PDF file below.

POWERS 1/4" 1 1/2" NAIL-IN ANCHOR

The Zamac Hammer-Screw® is a unique, one-step drive anchor featuring a Phillips type head and a screw thread for use in concrete, block, brick or stone. With a body formed from corrosion resistant Zamac alloy and a carbon or stainless steel drive screw, this anchor has been developed by Powers as an improvement over standard nailin anchors.

POWERS 1/4" DROP IN ANCHOR

POWERS 1/4" FLAT HEAD SLEEVE ANCHORS (100/BX) VARIOUS SIZES

The Lok-Bolt AS is an all steel pre-assembled single unit sleeve anchor which can be used in concrete or masonry units. Available in multiple head styles for multiple applications and finished appearance, extension sleeves can be added to create longer lengths.

POWERS 1/4" FLAT HEAD TAPCONS (VARIOUS SIZES)

The TAPPER Anchoring System is a family of screw anchors, specially designed drill bits and installation tools designed to meet the needs of most light to medium duty applications in concrete, block and brick. The TAPPER concrete screw anchor is produced in either hex washer head or Phillips flat head styles from Perma-Seal™ coated or zinc plated carbon steel and Type 304 stainless steel. For heavy duty applications, the 3/8" size is made in zinc plated carbon steel.

POWERS 1/4" WEDGE ANCHORS (100/BX) VARIOUS SIZES

The Power-Stud+ SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal-weight concrete, structural sand-lightweight concrete and concrete over metal deck. The anchor is manufactured with a zinc plated carbon steel body and expansion clip. Nut and washer are included