POWERS 3/8" WEDGE ANCHORS (50/BX) VARIOUS SIZES

The Power-Stud+ SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal-weight concrete, structural sand-lightweight concrete and concrete over metal deck. The anchor is manufactured with a zinc plated carbon steel body and expansion clip. Nut and washer are included

POWERS 3/8" X 4" & 3/8" X 6" WEDGE-BOLT

3/8" X 4" & 3/8 X 6" 50/BX The Wedge-Bolt® anchor is a one piece heavy duty anchor with a finished hex head. It is easy to identify, removable and vibration-resistant.

POWERS 3/8" X 6" X 8" SDS WEDGE-BIT

For proper performance, the Wedge-Bolt anchors must be installed with a Wedge-Bit. The Wedge-Bit has a special matched tolerance range designed to provide optimum performance for the anchor. The available shank styles and sizes are listed in the PDF file below.

POWERS 5/16" FLAT HEAD SLEEVE ANCHORS (100/BX) VARIOUS SIZES

The Lok-Bolt AS is an all steel pre-assembled single unit sleeve anchor which can be used in concrete or masonry units. Available in multiple head styles for multiple applications and finished appearance, extension sleeves can be added to create longer lengths.

POWERS 5/32" X 4 1/2" & 3/16" X 4 1/2" TAPCON BIT

TAPPER™ Drill Bits in the diameters listed are nominal size. 3/16" and 1/4" Perma-Seal™ TAPPER™ anchors must be installed with special tolerance TAPPER™ drill bits. 1/4" Stainless Steel TAPPER™ anchors require the use of specific tolerance TAPPER™ drill bits, which are gold or silver colored, to denote the standard size and special application size for harder materials. 3/8" diameter TAPPER™ anchors should be installed with a 1/4" ANSI drill bit.

POWERS 5/8" DROP IN ANCHOR

POWERS 5/8" SLEEVE ANCHORS (25/BX) VARIOUS SIZES

The Lok-Bolt AS is an all steel pre-assembled single unit sleeve anchor which can be used in concrete or masonry units. Available in multiple head styles for multiple applications and finished appearance, extension sleeves can be added to create longer lengths.

POWERS 5/8" WEDGE ANCHORS (25/BX) VARIOUS SIZES

The Power-Stud+ SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal-weight concrete, structural sand-lightweight concrete and concrete over metal deck. The anchor is manufactured with a zinc plated carbon steel body and expansion clip. Nut and washer are included

POWERS 5/8" X 10" X 12" SDS WEDGE-BIT

For proper performance, the Wedge-Bolt anchors must be installed with a Wedge-Bit. The Wedge-Bit has a special matched tolerance range designed to provide optimum performance for the anchor. The available shank styles and sizes are listed in the PDF file below.

POWERS 5/8" X 4" & 5/8" X 6" WEDGE-BOLT 25/BX

PART# 7262SD, 7266SD The Wedge-Bolt® anchor is a one piece heavy duty anchor with a finished hex head. It is easy to identify, removable and vibration-resistant.

POWERS 5/8" X 8" X 13" SPLINE WEDGE BIT

For proper performance, the Wedge-Bolt anchors must be installed with a Wedge-Bit. The Wedge-Bit has a special matched tolerance range designed to provide optimum performance for the anchor. The available shank styles and sizes are listed in the PDF file below.

POWERS 6-8 X 3/4" BANTUM PLUGS (1000/BX)

The Bantam Plug™ anchor is a plastic anchor designed for use with lightweight fixtures with a sheet metal or wood screw. The anchor is recommended for light duty static applications where holding power is not a critical factor. It should not be used overhead.

POWERS 8-10 X 7/8" BANTUM PLUGS (1000/BX)

The Bantam Plug™ anchor is a plastic anchor designed for use with lightweight fixtures with a sheet metal or wood screw. The anchor is recommended for light duty static applications where holding power is not a critical factor. It should not be used overhead.

POWERS SETTING TOOL FOR DROP-IN ANCHORS

THERE ARE CERTAIN SIZE TOOLS FOR CERTAIN SIZE ANCHORS. (1/4", 3/8", 1/2", 5/8", 3/4")

PRO 14 Foam Dispensing Gun

No-drip precision application, Great Stuff Pro™ 14 Dispensing Gun provides total control over every seal, ensuring professionals get the maximum yield out of every can. Flow-control mechanism dispenses foam beads from 1/8” to 3” Lightweight, high-strength aluminum body with a metal trigger Works with all GREAT STUFF PRO™ cans No-drip foam spray dispensing gun

PROPEX LANDLOK C2 EROSION CONTROL 8' X 112.5' 100 SY/RL

PROPEX Landlok C2 PROPEX® Landlok® C2 erosion control blanket (ECB) consists of 100% mattress grade coconut fiber mechanically bound and covered on both sides by netting. The coconut fiber is homogeneously blended and evenly distributed throughout the blanket. The netting is UV stabilized polypropylene with mesh openings of approximately 0.7 in by 0.7 in (17 mm by 17 mm). The blanket is sewn on approximately 2 in (51 mm) centers with photodegradable polypropylene thread.