SPECCHEM SPECPLUG - Fast-Setting Hydraulic-Cement Mortar

SpecPlug is a fast-setting hydraulic cement mortar designed to instantly stop water flow through holes and cracks in concrete and masonry. It expands as it sets without shrinking or oxidizing, ensuring a durable repair. Single-component, easy to use by just adding water. Expands to form a strong, watertight bond to the substrate. Sets in approximately 3-5 minutes, rapidly stopping flowing water. Suitable for both vertical and underwater applications. Certified to NSF/ANSI Standard 61 for safe contact with potable water. Available in 10 lb pails and 50 lb pails.

SPECCHEM SPECPOXY CJ - 100% solids, Semi-Rigid Epoxy Control Joint Filler

SpecPoxy C.J. is a two-component, semi-rigid epoxy designed for filling control and construction joints in industrial concrete floors. It supports joint edges, reducing spalling caused by wheel traffic and complies with ACI 302, section 4.10 recommendations for epoxy joint fillers. Easy 1 to 1 mix ratio and pourable gray consistency. High elongation to resist tearing due to excessive movement. Moisture insensitive to cure in damp environments. Semi-rigid flexibility, not welding slabs together or becoming brittle with age. Optimum hardness to transfer wheel loads while allowing moderate movement. Available in 2 gallon and 10 gallon units.

SPECCHEM SPECPRIME - Re-Emulsifiable Underlayment Primer for SpecFlow

SpecPrime is a ready-to-use, rewettable primer which bonds new concrete and SpecChem underlayments to horizontal concrete or other sound surfaces. Recommended for interior and dry applications only. Specifically designed as a primer for SpecFlow. Re-emulsifiable/rewettable Excellent bonding agent/superior adhesive strength Specifically designed for use with SpecFlow Can be used when there is a delay between primer application and subsequent topping or underlayment VOC compliant Available in 55-gallon drums, 5-gallon pails, and 1-gallon jugs (4 per case).

SPECCHEM SPECSTRIP - Reactive Form Release Agent

SPECSTRIP is a chemically reactive, mineral oil base, concrete release agent specially engineered to positively prevent bonding of the concrete to forms and form liners. SpecStrip contains no waxes or silicones. Improves release of formwork Reduces concrete buildup on formwork and liners Reduces cleaning of formwork Protects formwork against rust Leaves no residue, stain or discoloration Helps reduce dusting of concrete SpecStrip is available in 275-gallon totes, 55-gallon drums, and 5-gallon pails.

SPECCHEM SPECTILT 100 - Premium reactive solvent-based tilt-up bond breaker

Premium reactive solvent-based tilt-up bond breaker SpecTilt 100 is a chemically reactive tilt-up cure/bond breaker specially engineered to provide a clean, easy lift of tilt-up panels. SpecTilt 100 is formulated with a solvent blend allowing fast-drying, solvent-base performance. Fast-drying for improved productivity Chemically reactive Clean panels – no residue, stain, or discoloration Resists foot traffic abrasion SpecTilt 100 is available in 55-gallon drums and 5-gallon pails.

SPECCHEM Surface Shine Gray 25% solids solvent-based cure & seal (ASTM C309 compliant)

Surface Shine Gray is a VOC compliant acrylic polymer engineered to cure, seal, harden, and dustproof freshly placed concrete and improve the wearability and durability of aged concrete surfaces. Surface Shine Gray is a light gray pigmented acrylic sealer that dries to a medium to light gray finish. Minimizes efflorescence Beautifies and protects concrete and exposed aggregate Will not yellow under extreme UV exposure Acts as a binder to minimize aggregate pop-out Protects sealed surfaces from damaging effects of de-icing salts and acid rain Provides resistance to abrasion and a wide range of chemicals and oils Available in 5 gallon pails.

SPECCHEM Surface Shine High-gloss acrylic sealer (ASTM C1315 Class A)

Surface Shine is a transparent, high-gloss, nonyellowing acrylic polymer engineered as a cure and seal specifically for exterior surfaces such as exposed aggregate, natural stone, brick, quarry tile, terrazzo, and other concrete surfaces. It is also suitable for interior applications. This non-yellowing, durable sealer enhances the appearance of all treated surfaces with a high-gloss sheen   Minimizes efflorescence Beautifies and protects concrete and exposed aggregate Will not yellow under extreme UV exposure Acts as a binder to minimize aggregate pop-out Protects sealed surfaces from damaging effects of de-icing salts and acid rain Provides resistance to abrasion and a wide range of chemicals and oils Available in 55 gallon drums and 5 gallon pails.

SPEED DOWEL SLEEVE FOR 1/2" REBAR OR 5/8" SMOOTH DOWELS

Design: Round Dowel Dowel Length: 24" Sleeve Length: 12" Dowel Size: 5/8" Smooth Rebar Size: #4 Rebar For Slab Depths: 5" to 6"

SPEED DOWEL SLEEVE FOR 5/8" REBAR OR 3/4" SMOOTH DOWELS

Design: Round Dowel Dowel Length: 18" Sleeve Length: 9" Dowel Size: 3/4 Rebar Size: #5 Rebar For Slab Depths: 5" to 6"

SPONGE

SQUEEGE STEEL BRACKET HANDLE

Steel Bracket Handle For use with 41, 41-N, 46 and 46-N squeegees. This handle is included in the pricing of these squeegees but can also be ordered separately.

STACK CLEANING BRUSH

Truck Exhaust Stack Cleaning Brush White Tampico fiber staple set in a flexible circular plastic block with standard thread handle hole. This brush was designed for cleaning chrome plated exhaust stacks on diesel trucks. Good for cleaning overhead pipes in food processing plants. Overall diameter: 9 inches Length of Trim: 1¾ inches Inside diameter: 3¾ inches Width of block: 1d inches

STAINLESS STEEL SAFETY STEP

SAFETY STEP HAND EDGER •GROOVE SPACING 3/4IN CENTERS Item ID CF112 Weight 1.00 LB Length 6 in. (15.24 cm) Width 4.5 in. (11.430 cm) Thickness 0.108 in. (0.27432 cm) Radius 1/2 in. (1.270 cm) Lip 5/8 in. (1.58750 cm) Bit Depth 1/4 in. (0.6350 cm) Bit Width 1/4 in. (0.6350 cm) Handle WOOD

STAKE CHASER (VARIOUS COLORS)

BLUE: (FOR WATER ) 6" Stake Chasers can be easily hammered into a wooden stake or quickly fit onto a 60 penny (60d) nail ORANGE: (COMMUNICATION / CATV) 6" Stake Chasers can be easily hammered into a wooden stake or quickly fit onto a 60 penny (60d) nail PINK: (FOR SURVEY MARKINGS) 6" Stake Chasers can be easily hammered into a wooden stake or quickly fit onto a 60 penny (60d) nail RED: (FOR ELECTRIC) 6" Stake Chasers can be easily hammered into a wooden stake or quickly fit onto a 60 penny (60d) nail YELLOW: (FOR GAS,OIL,& STEAM) 6" Stake Chasers can be easily hammered into a wooden stake or quickly fit onto a 60 penny (60d) nail

STAKE PULLER

Heavy duty for 3/4" or 7/8" diameter stakes Specs & Sizes for dee’s Stake Pullers All of dee's stake pullers are made from domestically produced high-grade steel. The heavy-duty stake puller jaw is 4" deep x 3" wide and 5/8" thick. It is laser cut for precision stake pulling. The stake puller base 3" x 5" and is 3/4" thick. The 40" long fulcrum pipe is made from double walled pipe providing superior leverage, increased strength, and long life.

STANLEY 100/PK FATMAX BLADES

100/PK REPLACEMENT BLADES Features and Benefits Induction-hardened edge offers 75% longer-lasting* blade life 20% stronger* blade is heat treated for flexibility Blade edge remains 35% sharper