Explore Our Complete Catalog
Browse our full range of products and specifications
SOFF-CUT JOINT PROTECTORS
FOR ALL T-BLADES
SOFF-CUT JOINT PROTECTORS
FOR GS-1000 & GS-800 SAWS
SOFF-CUT JOINT PROTECTORS
FOR 12" - 14" BLADES(G30-0001)
SOFF-CUT JOINT PROTECTORS 6",
8", AND 10"SAW BLADES
SOFF-CUT XL-3000 (RED) EXCEL BLADE
The Husqvarna Excel 3000 Series Red features unique triangular arbor configuration and cuts medium to hard aggregate, medium abrasive sand.
SOFF-CUT XL8-5000 (YELLOW) EXCEL BLADE
The Husqvarna Excel 5000 Series Yellow features unique triangular arbor configuration and cuts medium to soft aggregate, abrasive sand.
SOFF-CUT XLV6-V23 V-LINE BLADE
6 (152) X .625 X (.125 PILOT) PROEDGE BEVELED BLADE FOR 150 AND 150D SAWS.
SOLOMON POWDERED INTEGRAL COLOR
Powdered Integral Color is the simple, cost effective way to color concrete. Easily dose color on the jobsite or at Ready Mix plants. Create consistently and uniformly colored concrete using Solomon Colors Powdered Integral Color. Solomon Colors Powdered Integral Color is ASTM C979 compliant. It is free of extenders and fillers for consistent, brilliant color at lower loadings than the competition. Powdered Integral Color will not react with atmospheric conditions, wash out, or fade when properly mixed and dosed.
SPECCHEM Cure & Seal 25 - 25% Solids Solvent- Based
Cure & Seal 25 is a VOC-compliant, non-yellowing acrylic polymer engineered to cure, seal, harden, and dustproof freshly placed concrete while enhancing the wearability and durability of aged concrete surfaces. Ready to use, dries quickly Cleans and brightens floors Reduces maintenance and clean-up costs Improves concrete’s resistance against deicing salts Non-staining Available in 55-gallon drums and 5-gallon pails.
SPECCHEM E-CURE - Water-Based Concrete Cure/Densifier
E-Cure® is a cutting-edge, clear concrete curing compound that addresses compatibility issues with flooring adhesives. It is designed for spray application to cure, harden, and dustproof concrete, ensuring proper strength development. E-Cure® creates a temporary membrane to enhance the concrete’s durability and is compatible with ASTM C309 Type 1D, Class A & B standards for moisture retention on hard-troweled surfaces. It may also contribute to LEED credits. Non-yellowing, Non-flammable/odorless/VOC Compliant Cure membrane dissipates in 3 – 5 days Resists acids, oils, greases, salts and tire marks USDA accepted, Certified for use to cure potable water structures Tested and certified to the performance requirements of NSF/ANSI 61 Independently adhesion tested compliant with thinset mortar and VCT by Tile Council of NA Available in 55-gallon drums and 5-gallon pails.
SPECCHEM NS Multi-Purpose Grout
Non-shrink non-metallic grout SC Multipurpose Grout is a non-shrink, non-metallic multi-purpose cement-based grout. SC Multipurpose Grout is formulated for a wide variety of grouting applications, from damp pack to flowable through a controlled, positive expansion. Controlled positive expansion for maximum effective bearing Non-metallic / non-corrosive Pourable / pumpable versatility Excellent freeze / thaw resistance Natural concrete gray Chloride and gypsum free Available in 50 lb bags, yielding approximately 0.45 cu. ft. in fluid condition. An addition of 50% by weight of 3/8” pea stone increases yield to approximately 0.59 cu. ft.
SPECCHEM ORANGE PEEL / CITRUS CLEANER - Citrus-based solvent & degreaser
Orange Peel is a cost effective, natural citrus solvent, cleaner and degreaser. Orange Peel is an innovative solution for the toughest industrial applications. Orange Peel will effectively remove grease, grime and other contaminants from architectural concrete and other surfaces ORANGE PEEL can also be used to remove asphalt from tools or paving machines and dissolve/strip many types of carpet and tile cutback adhesives safely and effectively. VOC compliant (check local regulations). Refreshing citrus odor. Effective at removing tough stains without the hazards of traditional solvents. Available in 55-gallon drums, 5-gallon pails, and 1-gallon jugs (4 per case).
SPECCHEM SPEC FILM RTU - Ready-to-use Evaporation Retardant/Finishing aid
SpecFilm is a ready-to-use evaporation retardant and finishing aid on concrete flatwork of all types. When sprayed over fresh concrete, SpecFilm forms a thin, continuous film that prevents rapid moisture loss from the concrete surface. SpecFilm is especially effective when concreting operations must be performed in direct sun, wind, high temperatures, or low relative humidity. Significantly reduces plastic shrinkage and cracking caused by evaporation in low humidity, high temperatures and high winds Allows use of lower slump and lower water to cement ratio concrete Reduces wind crusting, stickiness, and sponginess, which often cause poor and uneven surface texture. Dyed pink as visual application aid. VOC compliant Helps minimize surface cracking due to early water loss of silica fume concrete Aids in finishing concrete and repair mortars that produce little or no bleed water such as micro silica or mixes containing no air entrainment. Available in 55-gallon drums, 5-gallon pails, and cases of four 1-gallon jugs.
SPECCHEM SPEC-ETCH Horizontal Surface Retarder
SpecEtch is a spray-applied, chemical surface retarder specifically formulated to expose the aggregate in freshly placed horizontal concrete. SpecEtch is designed to not alter the natural color of the aggregate or concrete, making it ideal for creating decorative finishes. Ready-to-use Does not alter natural color of aggregate or concrete Non-flammable, VOC Compliant Red dyed Typical etch is 1/4” to 3/8” Recommended for mix designs with 1/4” to 1/2” aggregate SpecEtch is available in 55-gallon drums and 5-gallon pails.
SPECCHEM SPECFLOW - Premium Self-Leveling Underlayment
SpecFlow is a cement-based, non-shrinking, self-leveling floor underlayment designed for interior use. This single-component product produces a smooth subfloor that can be feather edged and is compatible with adhesives for carpet and tile. Just mix SpecFlow with water, pour or pump, and it will seek its own level to produce a smooth, flat hard surface. Self-leveling, requiring no troweling Can be featheredged without fear of chipping or spalling. Produces a smooth, blemish-free surface, requiring no grinding or sanding Is compatible with subsequent adhesives for carpet, tile and the like. SpecFlow, when properly mixed, produces a flowable underlayment with a flow time of 20 minutes at 70 degrees F. Available in 50 lb. bags, with coverage approximately 24 sq.-ft. at 1/4 inch thickness.
SPECCHEM SPECHARD - Water-Based Siliconate Sealer/Densifier
SpecHard-Intraseal is a water-based silicate/siliconate sealer/densifier that significantly enhances the durability and appearance of concrete floors exposed to pedestrian and vehicle traffic. This proprietary, colorless blend of silicates and siliconates effectively penetrates concrete surfaces to seal, densify, and harden them, extending their lifespan and reducing maintenance costs. It is environmentally friendly, VOC compliant, and odorless, making it a safe choice for various applications. SpecHard-Intraseal is designed to resist dusting for years, offering a low sheen that beautifies the concrete surface without altering its non-slip texture. Strengthens and densifies concrete, improving abrasion and compressive strength Reduces porosity, resists water, oil, and chemical penetration Dustproofs surfaces and helps control hairline cracks VOC compliant, odorless, non-yellowing, LEED v4 compliant, and USDA accepted Long-lasting, low-maintenance, and cost-effective with easier cleaning and low-sheen finish Available in 55-gallon drums and 5-gallon pails.