Explore Our Complete Catalog
Browse our full range of products and specifications
DAYTON F-42 1/2" LTT INSERT - NC THREADS
NON STOCK The Dayton Superior F-42 Loop Ferrule Insert is fabricated by welding a looped strut to a closed-end ferrule. F-42 insert is available in the sizes shown in the chart and is well suited for structural connections and the suspension of equipment, piping, etc. Minimum spacing between inserts is twice the minimum corner distance.
DAYTON F-42 3/8" LTT INSERTS - NC THREADS
The Dayton Superior F-42 Loop Ferrule Insert is fabricated by welding a looped strut to a closed-end ferrule. F-42 insert is available in the sizes shown in the chart and is well suited for structural connections and the suspension of equipment, piping, etc. Minimum spacing between inserts is twice the minimum corner distance.
DAYTON F-42 5/8" LTT INSERT - NC THREADS
The Dayton Superior F-42 Loop Ferrule Insert is fabricated by welding a looped strut to a closed-end ferrule. F-42 insert is available in the sizes shown in the chart and is well suited for structural connections and the suspension of equipment, piping, etc. Minimum spacing between inserts is twice the minimum corner distance.
DAYTON J-6 SURE-LIFT BOND BREAKER (55 GALLON)
Sure Lift™ with Dye J6D is a reactive and membrane forming bond breaker for use in tilt wall construction. Sure Lift™ with Dye J6D is a special formula of polymers and propriety ingredients designed to provide clean, easy lifting of tilt panels. Sure Lift™ with Dye J6D has a fugitive dye for ease of visual inspection during application and is also available without the dye upon special request.
DAYTON P-51 4 TON SWIFT LIFT LIFTING EYE
NON STOCK ITEM. RENTAL IN OKLAHOMA ONLY. The Dayton Superior P51 Swift Lift® Lifting Eye is a high-quality steel casting. The P51 lifting eye fits into the recess formed by the recess plug and engages the spherical head of the P52 Swift Lift® Anchor. The connection of the eye to the anchor can only be accomplished with the ball of the lifter facing the surface of the concrete. Accidental disengagement is prevented by a gravity-actuated safety pin. The P51 Swift Lift® Lifting Eye is available in two sizes that are recommended for tilt-up edge lift applications. The 2-Ton unit that mates with the 9/16” diameter Swift Lift® anchor and the 4-Ton unit that utilizes the 3/4” diameter anchor. P-51 Swift Lift® Lifting Eye is available in 2T, 4T and 8T.
DAYTON P-53 2.5 TON SWIFT LIFT EYE ANCHOR
The Dayton Superior Swift Lift Eye Anchor (P53) is similar to the P52 anchor but has an eye at the foot to accept P60 Tension Bars. The P53 anchor is used primarily in thin sections, thin panels of lightweight concrete or shapes that must be handled at concrete compressive strengths below 2,000 psi. P53 anchors are available in 1, 2, 3, 4, 8 and 16 T capacities and each has its load rating embossed on the head. NOTE: P60 Tension Bar must be used with this anchor to achieve loads.
DAYTON P-53 5 TON SWIFT LIFT EYE ANCHOR
The Dayton Superior Swift Lift Eye Anchor (P53) is similar to the P52 anchor but has an eye at the foot to accept P60 Tension Bars. The P53 anchor is used primarily in thin sections, thin panels of lightweight concrete or shapes that must be handled at concrete compressive strengths below 2,000 psi. P53 anchors are available in 1, 2, 3, 4, 8 and 16 T capacities and each has its load rating embossed on the head. NOTE: P60 Tension Bar must be used with this anchor to achieve loads.
DAYTON P-59 2 TON SHEAR BAR SL
The Dayton Superior Swift Lift Shear Bars (P59) and Smooth Wire Shear Bars (P59SW) are utilized when edge-lifting precast elements. The shear bar is secured tightly to the recess plug and at the time of lift helps to transfer the shear load deeper into the concrete. The P59 Shear Bars are designed to snap into the built-in clips on the P54 Recess Plug.
DAYTON P-59 4 TON SHEAR BAR FOR SL
Dayton Superior Swift Lift Shear Bars (P59) are utilized when edge-lifting precast elements. The shear bar is secured tightly to the recess plug and at the time of lift helps to transfer the shear load deeper into the concrete. The P59 Smooth Wire Shear Bar is designed to snap into the built-in clips on the P54 Recess Plug.