Explore Our Complete Catalog
Browse our full range of products and specifications
DAYTON B-18 3/4" X 6" FLARED COIL LOOP INSERT
The load carrying capacity of any cast-in-place concrete insert is largely dependent upon the ability of the insert to draw upon the tensile strength of the mass of concrete within which it is embedded. The B18 Single Flared Coil Loop Insert makes effective use of this principle by increasing the depth and width of concrete embedment. B18 inserts are available with an optional B3 Screw-on Coil for use with the B30 Screw-on Plastic Cone which acts to set the insert back from the face of the concrete. Minimum spacing between inserts is twice the corner distance.
DAYTON BAR
The A95 - Dayton Bar is manufactured with a 1” x 2” structural tube handle that has been carefully Mig welded to a heat-treated milled blade. This bar is an ideal tool for use by the tilt-up erector— you will find many uses for it, from adjusting and/or stripping side forms to “jockeying” tilt-up wall panels into position. Available with either a 3” or 5” wide blade. Please specify blade width when ordering.
DAYTON F - 42 3/4" LTT INSERT - NC THREADS
The Dayton Superior F-42 Loop Ferrule Insert is fabricated by welding a looped strut to a closed-end ferrule. F-42 insert is available in the sizes shown in the chart and is well suited for structural connections and the suspension of equipment, piping, etc. Minimum spacing between inserts is twice the minimum corner distance.
DAYTON F-42 1/2" LTT INSERT - NC THREADS
NON STOCK The Dayton Superior F-42 Loop Ferrule Insert is fabricated by welding a looped strut to a closed-end ferrule. F-42 insert is available in the sizes shown in the chart and is well suited for structural connections and the suspension of equipment, piping, etc. Minimum spacing between inserts is twice the minimum corner distance.
DAYTON F-42 3/8" LTT INSERTS - NC THREADS
The Dayton Superior F-42 Loop Ferrule Insert is fabricated by welding a looped strut to a closed-end ferrule. F-42 insert is available in the sizes shown in the chart and is well suited for structural connections and the suspension of equipment, piping, etc. Minimum spacing between inserts is twice the minimum corner distance.
DAYTON F-42 5/8" LTT INSERT - NC THREADS
The Dayton Superior F-42 Loop Ferrule Insert is fabricated by welding a looped strut to a closed-end ferrule. F-42 insert is available in the sizes shown in the chart and is well suited for structural connections and the suspension of equipment, piping, etc. Minimum spacing between inserts is twice the minimum corner distance.
DAYTON J-6 SURE-LIFT BOND BREAKER (55 GALLON)
Sure Lift™ with Dye J6D is a reactive and membrane forming bond breaker for use in tilt wall construction. Sure Lift™ with Dye J6D is a special formula of polymers and propriety ingredients designed to provide clean, easy lifting of tilt panels. Sure Lift™ with Dye J6D has a fugitive dye for ease of visual inspection during application and is also available without the dye upon special request.
DAYTON P-51 4 TON SWIFT LIFT LIFTING EYE
NON STOCK ITEM. RENTAL IN OKLAHOMA ONLY. The Dayton Superior P51 Swift Lift® Lifting Eye is a high-quality steel casting. The P51 lifting eye fits into the recess formed by the recess plug and engages the spherical head of the P52 Swift Lift® Anchor. The connection of the eye to the anchor can only be accomplished with the ball of the lifter facing the surface of the concrete. Accidental disengagement is prevented by a gravity-actuated safety pin. The P51 Swift Lift® Lifting Eye is available in two sizes that are recommended for tilt-up edge lift applications. The 2-Ton unit that mates with the 9/16” diameter Swift Lift® anchor and the 4-Ton unit that utilizes the 3/4” diameter anchor. P-51 Swift Lift® Lifting Eye is available in 2T, 4T and 8T.
DAYTON P-53 2.5 TON SWIFT LIFT EYE ANCHOR
The Dayton Superior Swift Lift Eye Anchor (P53) is similar to the P52 anchor but has an eye at the foot to accept P60 Tension Bars. The P53 anchor is used primarily in thin sections, thin panels of lightweight concrete or shapes that must be handled at concrete compressive strengths below 2,000 psi. P53 anchors are available in 1, 2, 3, 4, 8 and 16 T capacities and each has its load rating embossed on the head. NOTE: P60 Tension Bar must be used with this anchor to achieve loads.