C67 TYPE 1 TIE BAR BEAM CLIP HANGER EPOXY COATED OR E-GALV A=7/1/2" H=5"

C-67 Tie Bar Beam Clip Pre-stress Hanger is an ideal half hanger for
supporting overhang formwork over stay-in-place decking.
These half hangers are fabricated with the strut wire
formed into a “J” shape so it engages the edge of the flange. A 90° interlock end clip is welded to the strut wire to provide increase
capacity. This hanger is furnished with a 90° end clip that accepts a 1/2″ diameter coil rod or bolt. Other sizes and configurations
available. Contact technical service for assistance.