SPATULA, 5"

SPATULA, 6"

SPATULA, 8"

SPECCHEM Cure & Seal 25 - 25% Solids Solvent- Based

Cure & Seal 25 is a VOC-compliant, non-yellowing acrylic polymer engineered to cure, seal, harden, and dustproof freshly placed concrete while enhancing the wearability and durability of aged concrete surfaces. Ready to use, dries quickly Cleans and brightens floors Reduces maintenance and clean-up costs Improves concrete’s resistance against deicing salts Non-staining Available in 55-gallon drums and 5-gallon pails.

SPECCHEM LITHSEAL SC (Lithium Silicate Concrete Sealer/Densifier)

LithSeal SC is a premium lithium silicate sealer/ densifier/hardener for concrete surfaces. LithSeal SC deeply penetrates and reacts with cured concrete. This reaction produces a calcium silicate hydrate within the concrete pores. Treated surfaces will remain breathable reduce porosity, reduce dusting, reduce water permeability and increase abrasion resistance. When properly applied, LithSeal SC will not leave the whitish blush characteristic of other sodium silicate products. Reduce application costs with one step low pressure spray application Reduce dusting, porosity, water permeability. Improves abrasion resistance, light reflectance and gloss. Deeper penetrating then conventional silicates. Breathable, can be used interior and exterior. Fast-curing. Ready for traffic in one hour for most floors.

SPECCHEM ORANGE PEEL / CITRUS CLEANER - Citrus-based solvent & degreaser

Orange Peel is a cost effective, natural citrus solvent, cleaner and degreaser. Orange Peel is an innovative solution for the toughest industrial applications. Orange Peel will effectively remove grease, grime and other contaminants from architectural concrete and other surfaces ORANGE PEEL can also be used to remove asphalt from tools or paving machines and dissolve/strip many types of carpet and tile cutback adhesives safely and effectively. VOC compliant (check local regulations). Refreshing citrus odor. Effective at removing tough stains without the hazards of traditional solvents. Available in 55-gallon drums, 5-gallon pails, and 1-gallon jugs (4 per case).

SPECCHEM Precision Grout Green Conscious Product Non-shrink non-metallic grout

SC Precision Grout is a high-flow, non-shrink, non-metallic, cement-based grout engineered for precision grouting applications. Its formula accommodates a wide range of grouting applications, from plastic to fluid consistencies, through controlled, positive expansion. It’s designed for effective load bearing in high-flow precision grouting tasks. High flow with early high compressive strength. Reduces project downtime. Controlled positive expansion ensures optimal load bearing. Non-metallic and non-corrosive. Versatile for pouring or pumping. Excellent freeze/thaw resistance. Can be extended with pea stone for deep applications. Thermal shock resistant. USDA accepted.

SPECCHEM REPCON 928 - Polymer-Modified Rapid-Setting Concrete Repair Mortar With Corrosion Inhibitor

RepCon 928 is a single-component, polymer-modified, fiber-reinforced, rapid-setting concrete repair mortar with corrosion inhibitor for horizontal and formed vertical use on concrete floors, highway pavements, bridge decks, and other applications requiring early resumption of traffic or use. One-component, dry-polymer modified. Just add water. Fiber-reinforced for early integral strength Air entrained for excellent freeze-thaw durability Takes foot traffic in 1 hour after final set Long work time for hot weather applications (available in fast-set version RepCon® 928 FS) Available in 50 lb bags or 3,000 lb SuperSacks, offering approximately 20 sq-ft coverage at 1/4 inch per 50 lbs.

SPECCHEM REPCON V/O - Single Component Polymer-Modified Concrete Repair Mortar With Corrosion Inhibitor

RepCon® V/O O is a single-component, polymer-modified, fiber-reinforced concrete repair mortar with integral corrosion inhibitor for use in a variety of horizontal, vertical, and overhead repair applications. RepCon® V/O incorporates the latest in polymer technology, offering superior durability, performance and ease of application in industrial, commercial, and infrastructure/DOT applications. One-component dry polymer-modified, just add water Fiber-reinforced for excellent strength and freeze thaw durability Hand-applied or spray applied for large projects Easy-to-apply/finish consistency up to 2” Contains integral corrosion inhibitor

SPECCHEM REPCON-H - Single-Component Polymer-Modified Concrete Repair Mortar with Corrosion Inhibitor

RepCon® H is a single-component, polymer-modified, fiber-reinforced concrete repair mortar with an integral corrosion inhibitor. It is ideal for various horizontal repair applications including form/pour, screed, or trowel down methods. Utilizing the latest polymer technology, RepCon® H offers superior durability, performance, and ease of application in industrial, commercial, and infrastructure settings. One-component, just add water. Fiber-reinforced for added strength. Utilizes dry-polymer technology for excellent freeze-thaw durability. Flowable and pumpable consistency for easy application. Contains integral corrosion inhibitor. Suitable for various horizontal and vertical form/pour concrete repairs and overlays. Natural concrete-gray color. 50 lb bags, covering approximately 20 sq-ft at 1/4? thickness.

SPECCHEM SPEC FILM RTU - Ready-to-use Evaporation Retardant/Finishing aid

SpecFilm is a ready-to-use evaporation retardant and finishing aid on concrete flatwork of all types. When sprayed over fresh concrete, SpecFilm forms a thin, continuous film that prevents rapid moisture loss from the concrete surface. SpecFilm is especially effective when concreting operations must be performed in direct sun, wind, high temperatures, or low relative humidity. Significantly reduces plastic shrinkage and cracking caused by evaporation in low humidity, high temperatures and high winds Allows use of lower slump and lower water to cement ratio concrete Reduces wind crusting, stickiness, and sponginess, which often cause poor and uneven surface texture. Dyed pink as visual application aid. VOC compliant Helps minimize surface cracking due to early water loss of silica fume concrete Aids in finishing concrete and repair mortars that produce little or no bleed water such as micro silica or mixes containing no air entrainment. Available in 55-gallon drums, 5-gallon pails, and cases of four 1-gallon jugs.

SPECCHEM SPEC-ETCH Horizontal Surface Retarder

SpecEtch is a spray-applied, chemical surface retarder specifically formulated to expose the aggregate in freshly placed horizontal concrete. SpecEtch is designed to not alter the natural color of the aggregate or concrete, making it ideal for creating decorative finishes. Ready-to-use Does not alter natural color of aggregate or concrete Non-flammable, VOC Compliant Red dyed Typical etch is 1/4” to 3/8” Recommended for mix designs with 1/4” to 1/2” aggregate SpecEtch is available in 55-gallon drums and 5-gallon pails.

SPECCHEM SPECFLOW - Premium Self-Leveling Underlayment

SpecFlow is a cement-based, non-shrinking, self-leveling floor underlayment designed for interior use. This single-component product produces a smooth subfloor that can be feather edged and is compatible with adhesives for carpet and tile. Just mix SpecFlow with water, pour or pump, and it will seek its own level to produce a smooth, flat hard surface. Self-leveling, requiring no troweling Can be featheredged without fear of chipping or spalling. Produces a smooth, blemish-free surface, requiring no grinding or sanding Is compatible with subsequent adhesives for carpet, tile and the like. SpecFlow, when properly mixed, produces a flowable underlayment with a flow time of 20 minutes at 70 degrees F. Available in 50 lb. bags, with coverage approximately 24 sq.-ft. at 1/4 inch thickness.

SPECCHEM SPECHARD - Water-Based Siliconate Sealer/Densifier

SpecHard-Intraseal is a water-based silicate/siliconate sealer/densifier that significantly enhances the durability and appearance of concrete floors exposed to pedestrian and vehicle traffic. This proprietary, colorless blend of silicates and siliconates effectively penetrates concrete surfaces to seal, densify, and harden them, extending their lifespan and reducing maintenance costs. It is environmentally friendly, VOC compliant, and odorless, making it a safe choice for various applications. SpecHard-Intraseal is designed to resist dusting for years, offering a low sheen that beautifies the concrete surface without altering its non-slip texture. Strengthens and densifies concrete, improving abrasion and compressive strength Reduces porosity, resists water, oil, and chemical penetration Dustproofs surfaces and helps control hairline cracks VOC compliant, odorless, non-yellowing, LEED v4 compliant, and USDA accepted Long-lasting, low-maintenance, and cost-effective with easier cleaning and low-sheen finish Available in 55-gallon drums and 5-gallon pails.

SPECCHEM SPECPLUG - Fast-Setting Hydraulic-Cement Mortar

SpecPlug is a fast-setting hydraulic cement mortar designed to instantly stop water flow through holes and cracks in concrete and masonry. It expands as it sets without shrinking or oxidizing, ensuring a durable repair. Single-component, easy to use by just adding water. Expands to form a strong, watertight bond to the substrate. Sets in approximately 3-5 minutes, rapidly stopping flowing water. Suitable for both vertical and underwater applications. Certified to NSF/ANSI Standard 61 for safe contact with potable water. Available in 10 lb pails and 50 lb pails.

SPECCHEM SPECPRIME - Re-Emulsifiable Underlayment Primer for SpecFlow

SpecPrime is a ready-to-use, rewettable primer which bonds new concrete and SpecChem underlayments to horizontal concrete or other sound surfaces. Recommended for interior and dry applications only. Specifically designed as a primer for SpecFlow. Re-emulsifiable/rewettable Excellent bonding agent/superior adhesive strength Specifically designed for use with SpecFlow Can be used when there is a delay between primer application and subsequent topping or underlayment VOC compliant Available in 55-gallon drums, 5-gallon pails, and 1-gallon jugs (4 per case).