ERB "UNCORDED" EAR PLUGS

Carton Qty 100 pair/box. Uncorded reusable earplug. Distinctive triple flanged design. Very effective hearing protection. Convenient packaging for on-site distribution. Each pair of plugs is individually wrapped. Bright Orange. NRR 25dB

ERB "CORDED" EAR PLUGS W/ VIAL

Carton Qty 50 pair/box. Distinctive triple flanged design. Very effective hearing protection. Conveniently packaged in vial. Vial can be imprinted. Each pair of plugs is individually wrapped. Bright Orange, PVC cord. NRR 25dB

ENGINEER RIBBON

AVAILABLE IN: BLUE, GREEN, ORANGE, YELLOW, WHITE, RED, & PINK Our “ULTRA” tape is constructed from high quality, economically priced embossed PVC. The tape can withstand 0Àö temperatures without cracking, fading, or tearing. Our vibrant colors are the brightest and boldest available and are UV stabilized to provide long-lasting color retention. Whether used for surveying, mapping, forestry, tagging, roping off an area, or any other marking application, Our “ULTRA ” tape sets a new standard. Tapes are stocked and priced here in 1-3/16” widths x 100 yds,

DAYTON P-60 REINFORCING BAR FOR SWIFT

LIFT ANCHOR #5 BAR

DAYTON P-60 REINFORCING BAR FOR 2.5 T

SL ANCHOR-#3 BAR

DAYTON P-59 4 TON SHEAR BAR FOR SL

Dayton Superior Swift Lift Shear Bars (P59) are utilized when edge-lifting precast elements. The shear bar is secured tightly to the recess plug and at the time of lift helps to transfer the shear load deeper into the concrete. The P59 Smooth Wire Shear Bar is designed to snap into the built-in clips on the P54 Recess Plug.

DAYTON P-59 2 TON SHEAR BAR SL

The Dayton Superior Swift Lift Shear Bars (P59) and Smooth Wire Shear Bars (P59SW) are utilized when edge-lifting precast elements. The shear bar is secured tightly to the recess plug and at the time of lift helps to transfer the shear load deeper into the concrete. The P59 Shear Bars are designed to snap into the built-in clips on the P54 Recess Plug.

DAYTON P-53 5 TON SWIFT LIFT EYE ANCHOR

The Dayton Superior Swift Lift Eye Anchor (P53) is similar to the P52 anchor but has an eye at the foot to accept P60 Tension Bars. The P53 anchor is used primarily in thin sections, thin panels of lightweight concrete or shapes that must be handled at concrete compressive strengths below 2,000 psi. P53 anchors are available in 1, 2, 3, 4, 8 and 16 T capacities and each has its load rating embossed on the head. NOTE: P60 Tension Bar must be used with this anchor to achieve loads.

DAYTON P-53 2.5 TON SWIFT LIFT EYE ANCHOR

The Dayton Superior Swift Lift Eye Anchor (P53) is similar to the P52 anchor but has an eye at the foot to accept P60 Tension Bars. The P53 anchor is used primarily in thin sections, thin panels of lightweight concrete or shapes that must be handled at concrete compressive strengths below 2,000 psi. P53 anchors are available in 1, 2, 3, 4, 8 and 16 T capacities and each has its load rating embossed on the head. NOTE: P60 Tension Bar must be used with this anchor to achieve loads.

DAYTON F-42 5/8" LTT INSERT - NC THREADS

The Dayton Superior F-42 Loop Ferrule Insert is fabricated by welding a looped strut to a closed-end ferrule. F-42 insert is available in the sizes shown in the chart and is well suited for structural connections and the suspension of equipment, piping, etc. Minimum spacing between inserts is twice the minimum corner distance.

DAYTON F-42 3/8" LTT INSERTS - NC THREADS

The Dayton Superior F-42 Loop Ferrule Insert is fabricated by welding a looped strut to a closed-end ferrule. F-42 insert is available in the sizes shown in the chart and is well suited for structural connections and the suspension of equipment, piping, etc. Minimum spacing between inserts is twice the minimum corner distance.

DAYTON F - 42 3/4" LTT INSERT - NC THREADS

The Dayton Superior F-42 Loop Ferrule Insert is fabricated by welding a looped strut to a closed-end ferrule. F-42 insert is available in the sizes shown in the chart and is well suited for structural connections and the suspension of equipment, piping, etc. Minimum spacing between inserts is twice the minimum corner distance.

DAYTON B-18 3/4" X 6" FLARED COIL LOOP INSERT

The load carrying capacity of any cast-in-place concrete insert is largely dependent upon the ability of the insert to draw upon the tensile strength of the mass of concrete within which it is embedded. The B18 Single Flared Coil Loop Insert makes effective use of this principle by increasing the depth and width of concrete embedment. B18 inserts are available with an optional B3 Screw-on Coil for use with the B30 Screw-on Plastic Cone which acts to set the insert back from the face of the concrete. Minimum spacing between inserts is twice the corner distance.

DAYTON B-16 3/4 X 6" STRAIGHT COIL LOOP INSERT

Although simple in design and fabrication, the B16 Straight Coil Loop Insert is highly efficient for lifting and handling precast concrete elements. Standard inserts are shown in the chart. Special inserts for use with larger diameter coil bolts, or with loops having longer lengths and of heavier wire can be furnished, if required, on special order

DANGER TAPE 300'

DANGER TAPE 1000'