MILWAUKEE SDS-MAX To SDS+ Bit Adapter

Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee tool. If unable to locate an accessory or repair part please contact Milwaukee at milwaukeetool.com

MILWAUKEE SDS-PLUS BITS (VARIOUS SIZES)

Incorporating the industry standard shank for carbide drilling bits, Milwaukee's SDS bits have carbide vacuum brazed to heat treated steel shanks. The sharpened angle of the carbide creates two cutting edges. The flute of the bit is designed for fast removal of the concrete dust from the hole, aiding in more efficient drilling of small holes. SDS bits are available from 5/32 inch to 1 inch. One per package.

MILWAUKEE Sliding Utility Knife

The Sliding Utility Knife features a side activated slide switch to reduce the risk of exposing the blade accidentally. Complete with rubber over mold to increase comfort and reduce hand slippage, the tool also includes on board blade storage and a tool free blade change to increase efficiency in the field. The integrated gut hook and wire stripper also increase utility.

MILWAUKEE SPLINE / SDS PLUS ADAPTER

Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee tool. If unable to locate an accessory or repair part please contact Milwaukee at milwaukeetool.com.

MILWAUKEE SPLINE BUSHING

Drop Forged assembly with heat treated teeth used to prepare the concrete surface for re-surfacing. One per package

MILWAUKEE SPLINE ROD DRIVER

Drop Forged of high grade steel, this Hammer Iron is used by Utility companies to bury grounding rods in the soil. Internal diameter of the Ground Rod driver and capacity of the Hammer determine the size of ground rod able to be installed. One per package 10" LONG / 5/8" OR 3/4" ROD

MILWAUKEE SPLINE ROTARY HAMMER DRILL BITS (VARIOUS SIZES)

Two Cutter Spline Bits have a series of 12 spline that slide into an equal but opposite set of Spline in the drive system of the Spline Drive Hammer. This positive engagement of Spline to Spline allows maximum transmission of energy from the Hammer to the Bit. Superior quality carbide nibs are vacuum brazed to a heat treated steel body resulting in two cutting edges which pulverize the concrete as the bit turns and pounds the work surface. Available from 3/8 inch to 1-1/2 inch diameters as well as metric diameters. One per package.

MIRACLE BOND 1310 - 9oz SINGLE

MIRACLE BOND® 1310 is a multi-purpose, rapid cure, epoxy bonding and repair adhesive. Its specially formulated, non-sag property is ideal for bonding most materials together and is perfect for both overhead and vertical repairs, while still easily dispensed from most caulking guns. It has an application temperature range between 40 °F (4 °C) and 100 °F (38 °C).

MIRAFI 140N GEOTEXTILE 4oz. SEPERATOR FABRIC

Mirafi® 140N is a needlepunched nonwoven geotextile composed of polypropylene fibers, which are formed into a stable network such that the fibers retain their relative position. Mirafi® 140N is inert to biological degradation and resists naturally encountered chemicals, alkalis, and acids. Mirafi® 140N meets AASHTO M288-06 Class 3 for Elongation > 50%. 15'X 360' 600 SY/ROLL

MIRAFI 160N - 6oz SEPERATOR FABRIC - 15' X 300' - 500 SY/ROLL

  MIRAFI® 160N is a needlepunched nonwoven geotextile composed of polypropylene fibers, which are formed into a stable networksuch that the fibers retain their relative position. MIRAFI 160N is inert to biological degradation and resists naturally encounteredchemicals, alkalis, and acids. MIRAFI 160N meets AASHTO M288 Class 2 for Elongation > 50%.TenCate Geosynthetics Americas (A Solmax Company) is accredited by Geosynthetic Accreditation Institute – Laboratory AccreditationProgram (GAI-LAP).MIRAFI 160N meets Build America, Buy America Act, Pub. L. No. 117-58, div. G §§ 70901-52.    

MIRAFI 180N GEOTEXTILE 8oz SEPERATOR FABRIC - 15'X 300' 500 SY/ROLL

  MIRAFI® 180N is a needlepunched nonwoven geotextile composed of polypropylene fibers, which are formed into a stable networksuch that the fibers retain their relative position. MIRAFI 180N is inert to biological degradation and resists naturally encounteredchemicals, alkalis, and acids. MIRAFI 180N meets AASHTO M288 Class 1, 2, & 3 with elongation >50%.TenCate Geosynthetics Americas (A Solmax Company) is accredited by Geosynthetic Accreditation Institute – Laboratory AccreditationProgram (GAI-LAP).MIRAFI 180N meets Build America, Buy America Act, Pub. L. No. 117-58, div. G §§ 70901-52.    

MIRAFI 2' X 360' DFLD DRAIN

DFLD is a needle-punched nonwoven geotextile composed of polypropylene fibers, which are formed into a stable network such that the fibers retain their relative position. DFLD is inert to biological degradation and resistant to naturally encountered chemicals, alkalis, and acids.

MIRAFI RS380I FABRIC - 15' x 300' - 500SY/RL

MIRAFI® RS380i, a high-modulus woven geosynthetic, serves as a comprehensivesolution for soil reinforcement, confinement, separation, and filtration. Itsconstruction integrates:• black fibrillated polypropylene yarns for enhanced tensile strength• orange anti-clogging yarns for filtration benefits• blue wicking yarns for passive moisture management and an anti-capillary breakThe geosynthetic’s distinctive profile features an unparalleled ridge-to-valleydesign, ensuring surface roughness across its entire area. This design facilitatesmicro-interlocking through friction, fostering excellent interaction between theunderlying subgrade and overlying materials

MK 14" VECTOR BLADE Vector Segmented 14" x .125" x 1" DIAMOND BLADE

MONKEY FIST LIFTING PIN

Core drill a 2" hole, Insert and Lift. It’s that easy. Now you can remove pre-sawn concrete slabs without using a breaker. The Monkey Fist is designed to quickly remove sections of concrete bridge decks, repair road beds or renovate floor space in buildings. To recover The Monkey Fist, just lift the release handle and remove to reuse. Diameter / 2in Overall Height / 8in Material / Heat Treated Steel Weight / 10lb PAT# 8,651,540

MOP BUCKET PLASTIC

Yellow mop bucket with wringer designed for durability. Bucket is corrosion resistant. No cracks or crevices to collect dirt. Wringer is resistant to cleaning chemicals. Comes with standard 3" ball bearing casters.