Explore Our Complete Catalog
Browse our full range of products and specifications
SPEED DOWEL SLEEVE FOR 1/2" REBAR OR 5/8" SMOOTH DOWELS
Design: Round Dowel Dowel Length: 24" Sleeve Length: 12" Dowel Size: 5/8" Smooth Rebar Size: #4 Rebar For Slab Depths: 5" to 6"
SPEED DOWEL SLEEVE FOR 5/8" REBAR OR 3/4" SMOOTH DOWELS
Design: Round Dowel Dowel Length: 18" Sleeve Length: 9" Dowel Size: 3/4 Rebar Size: #5 Rebar For Slab Depths: 5" to 6"
SPECCHEM Surface Shine Gray 25% solids solvent-based cure & seal (ASTM C309 compliant)
Surface Shine Gray is a VOC compliant acrylic polymer engineered to cure, seal, harden, and dustproof freshly placed concrete and improve the wearability and durability of aged concrete surfaces. Surface Shine Gray is a light gray pigmented acrylic sealer that dries to a medium to light gray finish. Minimizes efflorescence Beautifies and protects concrete and exposed aggregate Will not yellow under extreme UV exposure Acts as a binder to minimize aggregate pop-out Protects sealed surfaces from damaging effects of de-icing salts and acid rain Provides resistance to abrasion and a wide range of chemicals and oils Available in 5 gallon pails.
SPECCHEM Surface Shine High-gloss acrylic sealer (ASTM C1315 Class A)
Surface Shine is a transparent, high-gloss, nonyellowing acrylic polymer engineered as a cure and seal specifically for exterior surfaces such as exposed aggregate, natural stone, brick, quarry tile, terrazzo, and other concrete surfaces. It is also suitable for interior applications. This non-yellowing, durable sealer enhances the appearance of all treated surfaces with a high-gloss sheen Minimizes efflorescence Beautifies and protects concrete and exposed aggregate Will not yellow under extreme UV exposure Acts as a binder to minimize aggregate pop-out Protects sealed surfaces from damaging effects of de-icing salts and acid rain Provides resistance to abrasion and a wide range of chemicals and oils Available in 55 gallon drums and 5 gallon pails.
SPECCHEM SPECSTRIP - Reactive Form Release Agent
SPECSTRIP is a chemically reactive, mineral oil base, concrete release agent specially engineered to positively prevent bonding of the concrete to forms and form liners. SpecStrip contains no waxes or silicones. Improves release of formwork Reduces concrete buildup on formwork and liners Reduces cleaning of formwork Protects formwork against rust Leaves no residue, stain or discoloration Helps reduce dusting of concrete SpecStrip is available in 275-gallon totes, 55-gallon drums, and 5-gallon pails.
SPECCHEM SPECPRIME - Re-Emulsifiable Underlayment Primer for SpecFlow
SpecPrime is a ready-to-use, rewettable primer which bonds new concrete and SpecChem underlayments to horizontal concrete or other sound surfaces. Recommended for interior and dry applications only. Specifically designed as a primer for SpecFlow. Re-emulsifiable/rewettable Excellent bonding agent/superior adhesive strength Specifically designed for use with SpecFlow Can be used when there is a delay between primer application and subsequent topping or underlayment VOC compliant Available in 55-gallon drums, 5-gallon pails, and 1-gallon jugs (4 per case).
SPECCHEM SPECPOXY CJ - 100% solids, Semi-Rigid Epoxy Control Joint Filler
SpecPoxy C.J. is a two-component, semi-rigid epoxy designed for filling control and construction joints in industrial concrete floors. It supports joint edges, reducing spalling caused by wheel traffic and complies with ACI 302, section 4.10 recommendations for epoxy joint fillers. Easy 1 to 1 mix ratio and pourable gray consistency. High elongation to resist tearing due to excessive movement. Moisture insensitive to cure in damp environments. Semi-rigid flexibility, not welding slabs together or becoming brittle with age. Optimum hardness to transfer wheel loads while allowing moderate movement. Available in 2 gallon and 10 gallon units.
SPECCHEM SPECTILT 100 - Premium reactive solvent-based tilt-up bond breaker
Premium reactive solvent-based tilt-up bond breaker SpecTilt 100 is a chemically reactive tilt-up cure/bond breaker specially engineered to provide a clean, easy lift of tilt-up panels. SpecTilt 100 is formulated with a solvent blend allowing fast-drying, solvent-base performance. Fast-drying for improved productivity Chemically reactive Clean panels – no residue, stain, or discoloration Resists foot traffic abrasion SpecTilt 100 is available in 55-gallon drums and 5-gallon pails.
SPECCHEM SPEC FILM RTU - Ready-to-use Evaporation Retardant/Finishing aid
SpecFilm is a ready-to-use evaporation retardant and finishing aid on concrete flatwork of all types. When sprayed over fresh concrete, SpecFilm forms a thin, continuous film that prevents rapid moisture loss from the concrete surface. SpecFilm is especially effective when concreting operations must be performed in direct sun, wind, high temperatures, or low relative humidity. Significantly reduces plastic shrinkage and cracking caused by evaporation in low humidity, high temperatures and high winds Allows use of lower slump and lower water to cement ratio concrete Reduces wind crusting, stickiness, and sponginess, which often cause poor and uneven surface texture. Dyed pink as visual application aid. VOC compliant Helps minimize surface cracking due to early water loss of silica fume concrete Aids in finishing concrete and repair mortars that produce little or no bleed water such as micro silica or mixes containing no air entrainment. Available in 55-gallon drums, 5-gallon pails, and cases of four 1-gallon jugs.
SPECCHEM ORANGE PEEL / CITRUS CLEANER - Citrus-based solvent & degreaser
Orange Peel is a cost effective, natural citrus solvent, cleaner and degreaser. Orange Peel is an innovative solution for the toughest industrial applications. Orange Peel will effectively remove grease, grime and other contaminants from architectural concrete and other surfaces ORANGE PEEL can also be used to remove asphalt from tools or paving machines and dissolve/strip many types of carpet and tile cutback adhesives safely and effectively. VOC compliant (check local regulations). Refreshing citrus odor. Effective at removing tough stains without the hazards of traditional solvents. Available in 55-gallon drums, 5-gallon pails, and 1-gallon jugs (4 per case).
SPECCHEM E-CURE - Water-Based Concrete Cure/Densifier
E-Cure® is a cutting-edge, clear concrete curing compound that addresses compatibility issues with flooring adhesives. It is designed for spray application to cure, harden, and dustproof concrete, ensuring proper strength development. E-Cure® creates a temporary membrane to enhance the concrete’s durability and is compatible with ASTM C309 Type 1D, Class A & B standards for moisture retention on hard-troweled surfaces. It may also contribute to LEED credits. Non-yellowing, Non-flammable/odorless/VOC Compliant Cure membrane dissipates in 3 – 5 days Resists acids, oils, greases, salts and tire marks USDA accepted, Certified for use to cure potable water structures Tested and certified to the performance requirements of NSF/ANSI 61 Independently adhesion tested compliant with thinset mortar and VCT by Tile Council of NA Available in 55-gallon drums and 5-gallon pails.
SOLOMON POWDERED INTEGRAL COLOR
Powdered Integral Color is the simple, cost effective way to color concrete. Easily dose color on the jobsite or at Ready Mix plants. Create consistently and uniformly colored concrete using Solomon Colors Powdered Integral Color. Solomon Colors Powdered Integral Color is ASTM C979 compliant. It is free of extenders and fillers for consistent, brilliant color at lower loadings than the competition. Powdered Integral Color will not react with atmospheric conditions, wash out, or fade when properly mixed and dosed.
SHORT CUFFED PVC GLOVES
Interlock Lined Knit Wrist Style #1SP7700 Fully Coated Single Dipped PVC Rough Palm for Excellent Grip Absorbent Interlock Cotton Lining Flexible in Cold Weather Repels Liquids Knit Wrist Keeps out Dirt and Debris Single dipped PVC gloves with interlock cotton lining for added comfort. Rough palm gives added grip on wet and dry surfaces. PVC stays flexible even at lower temperatures. Knit wrist keeps out dirt and debris.
SHOP-VAC FILTER BAGS FOR
Drywall Collection Filter Bags for 16-22 Gallon Tanks Catalog No. 906-73-00 Specially designed for pick-up of fine dust like drywall and cement dust or cold ashes, these high quality, disposable filter bags come in packages of two and fit 16-22 gallon vacs. 2-pack. Fits 16-22 Gallon Tanks.
SHOP-VAC FILTER BAGS FOR
Drywall Collection Filter Bags for 10-14 Gallon Tanks Catalog No. 906-72-00 Specially designed for pick-up of fine dust like drywall and cement dust or cold ashes, these high quality, disposable filter bags come in packages of two and fit 10-14 gallon vacs. 2-pack. Fits 10-14 Gallon Tanks.
SHOP-VAC CARTRIDGE 90304
Cartridge Filter for Wet or Dry Pickup Catalog No. 903-04-00 Designed to combat your toughest challenge, the Cartridge Filter can be used for both wet and dry pick-up and fits most Shop-Vac® wet/dry Vacs. Fits full size vacs. Does not fit Hang Up Vacs, 5 Gallon Contractor Portable, Floormaster Plus, All Around Plus, Heavy Duty Portable, 1x1®, BullDog® Portable, Mighty Mini®, Mini Hangup, Hippo®, or All Arounds with 1-1/2 or 2 Gallon tank sizes. Approximate size of cartridge: 8" diameter and 6.5" high.