Explore Our Complete Catalog
Browse our full range of products and specifications
16 COMMON NAILS (3-1/2")
SOLD BY THE LB. OR 50lb/BX
16 BOX NAILS (3-1/2")
SOLD BY THE LB. OR 50lb/BX
15# CHIPPING HAMMER W / SF1040
SWIVEL INSTALLED ( R/O SHANK) Shank Size .580" Hex or .680" Round Shank Stroke Length 2-17/32" (64mm) Piston Diameter 1-1/8" (28.54mm) Impact Rate 2,200 B.P.M. Weight 15 lbs. (6.8 kg.) Overall Length 17-23/32" (450mm) Air Consumption 31.8 C.F.M. Air Inlet 3/8" NPT Hose Size 1/2" (12.7mm) Warranty 1 Year Limited Warranty
15"-9PT STANLEY CROSSCUT SAW
15-334 - 15" Blade Length x 9 Points Per Inch SharpTooth™ Handsaw Features and Benefits Aggressive three-sided tooth design cuts 50% faster than conventional hand saws Teeth can be resharpened Select hardwood handle provides comfort and control Back of saw can be used to mark 45° and 90° angles
14" X 4" DURASOFT FINISHING (WOOD HANDLE)
PART# MXS64D •Highest grade hardened and tempered spring steel blade, properly shaped •Aluminum alloy Xtralite® mounting is lightweight but very strong •Beveled work edges prevent surface aggregate popping •Resilient DuraSoft® handle provides a soft feel, reduces fatigue, and offers excellent durability •U.S. Patent Nos. 5,522,111 and 5,713,096 Made in the USA
14" FLOOR SCRAPER (KRAFT)
HEAVY DUTY FLOOR SCRAPER •Ideal for after work clean up •Blades are firm but flexible Item ID CC214 Weight 4.00 LB Length 14 in. (35.56 cm) Width 4.75 in. (12.0650 cm) Thickness 0.026 in. (0.06604 cm) Handle 60IN WOOD
14" CRESCENT NIPPERS
Product Features: Strong, lightweight design for demanding construction use Hardened and honed cutting edges Drop-forged high quality tool steel, heat-treated, tempered handles/jaws Polished head Develops high leverage to cut large diameter nails and wire Black finish
14" CENTER CUT BOLT CUTTERS
•Handles have heavy vinyl grips with flat grips ends for 90° cuts.•All-purpose, center-cut jaws for soft, medium, and hard metals.•Forged, alloy tool steel jaws are precision ground for sure, efficient cutting and long life.•Lockplate reinforcement prevents jaw bolts from loosening or turning, keeps jaws in correct alignment.•One adjustment realigns cutting edges.•3-point toggle joint multiplies 50 lbs. of hard pressure on handles to 4,000 pounds at cutting jaws.
14" BULK LOAD CAULK GUN 20oz.
DL-45-01 20oz Deluxe Manual Bulk Gun Thrust: 375lbf Pressure: 120 psi Drive: Manual Capacity: 20 oz Barrel Type: Steel Barrel Diameter: 2" Nozzle Type: Standard 1/2" Line: Deluxe Square rod technology Steel barrel for durability Standard 1/2" metal nozzle
13.5" X .120 SOFF-CUT (ORANGE) EXCEL BLADE
Husqvarna Excel 4000 Series Orange The Husqvarna Excel 4000 Series Orange features unique triangular arbor configuration and cuts medium aggregate, medium abrasive sand.
13.5 X .120 (BLACK) SOFF-CUT EXCEL BLADE
Husqvarna Excel 6000 Series Black The Husqvarna Excel 6000 Series Black features unique triangular arbor configuration and cuts soft aggregate, abrasive sand.
12:1 CAULK GUN 10OZ
CHILTON Product Type: Single Component Application: Cartridge Capacity: 10 oz. Cartridge Mix-Ratio(s): non-applicable Features: •Standard 10.3oz. Catridge •Mechanical Advantage 12:1 •Switchable Flow Control •Wear Compensating Device •Built-in Ladder Hook •High Volume Usage •Catch Plate - Sintered Steel •Barrel Turns - Application Around Corners •Low-Medium Viscosity Materials •Thumb Activated Instant Pressure Release •All Component Replaceable Parts
1" X 24" WHIRLY BIT
PART# 44-01232 7/8" X 3 1/4" SHANK
1" X 18" WHIRLY BIT
PART# 44-03039 7/8" X 3 1/4" SHANK
1" to 5-1/2" PLASTIC SNAP ON CHAIR
Rebar Support Chairs can be used for at grade or precast applications with the use of #3 through #5 rebar or post-tension cable. •Rod snaps easily into chair •Wide base allows chair to stand securely •Eliminates wire tying •Non-corrosive durable polypropylene •Non-conducive, perfect for bridge decks
1" TO 3" SBU EPC
OCM Slab Bolster Upper Epoxy Coated metal bar supports are used in commercial concrete projects to support upper and lower mats of reinforcing steel in elevated concrete decks, footings, slab on grade, slab on metal deck, bridge decks and other applications. Features Available in heights ranging from 3/4" to 6" in 1/4" increments. Manufactured in 60" Lengths. Epoxy Coating is done at approved coating suppliers within the United States with epoxy powder that is supplied by manufacturers that supply 100% Made in USA material. The epoxy powder meets the requirements of ASTM A775, AASHTOM254 and /or ASHTOM284 and is applied at a minimum thickness of 6 mils to satisfy the DOT requirements for all states. The Bar Supports supplied by OCM Inc. meet CRSI and "Buy America" requirements.