Explore Our Complete Catalog
Browse our full range of products and specifications
VOLCLAY 2' HYDROBAR TUBES (32'/BX)
Hydrobar Tubes are a detailing accessory product for CETCO Waterproofing Systems used at the footing/wall junction to provide additional waterproofing protection. Hydrobar Tubes consist of a thin, water-soluble tubing filled with granular sodium bentonite. When wetted, the tubing dissolves, allowing the bentonite to hydrate and form into a dense, low permeable material that combines with the sodium bentonite in the Volclay System products. Each Hydrobar Tube measures 2” (50 mm) in diameter by 2’ (0.61 m), assuring a consistent application of sodium bentonite at the critical footing/wall junction.
VOLCLAY 3" SEAMTAPE (8 ROLLS/BX)
Seamtape is a single-sided tape consisting of an aggressive rubber-based adhesive with a durable polyethylene backing and release liner. The inherent adhesive and waterproofing properties of the tape effectively splices the liner face of waterproofing membranes at the overlaps. Seamtape provides good chemical resistance and excellent moisture resistance properties. Its flexibility allows the tape to be easily installed on irregular surface conditions. The adhesive is protected by a release liner that is removed during installation.
VOLCLAY BENTOSEAL TROWEL GRADE
3/GALLON PAIL 75 PER PALLET
VOLCLAY HYDROBAR TUBE 2'LONG
16 TUBES PER CARTON 32LF
VOLCLAY SWELLTITE(125 SF/ROLL)
40" X 37'9" ROLL Swelltite is a highly effective Waterproofing composite of sodium bentonite compound integrally bonded to a geomembrane liner. This composition combines the active waterproofing benefits of sodium bentonite with the strength and puncture resistance of a thick geomembrane liner.
VOLCLAY TYPE 1 PANELS 4'X4'
125 PANELS PER PALLET 2000/SQ'
VOLCLAY WATERSTOP RX101
3/4"X1" 16'8"/RL 100'BX Waterstop-RX is a sodium bentonite based waterstop designed to stop water infiltration through cast-in-place concrete construction joints by expanding upon contact with water to form a positive seal against the concrete. The key to Waterstop-RX’s effectiveness is its high sodium bentonite content which provides superior expansion to seal and fill voids and cracks in the concrete. Waterstop-RX is an active bentonite/ butyl-rubber based waterstop that is designed to replace passive PVC/Rubber dumbbell waterstops, thereby eliminating the requirement of special pieces, split-forming and seam welding. Waterstop-RX has been successfully tested by independent testing firms to over 200 feet (60 meters) of hydrostatic water pressure, under both continuous immersion and wet/dry cycling.
VOLCLAY WATERSTOP RX102
3/4"X3/8"33.4'/RL200'BX Waterstop-RX is a sodium bentonite based waterstop designed to stop water infiltration through cast-in-place concrete construction joints by expanding upon contact with water to form a positive seal against the concrete. The key to Waterstop-RX’s effectiveness is its high sodium bentonite content which provides superior expansion to seal and fill voids and cracks in the concrete. Waterstop-RX is an active bentonite/ butyl-rubber based waterstop that is designed to replace passive PVC/Rubber dumbbell waterstops, thereby eliminating the requirement of special pieces, split-forming and seam welding. Waterstop-RX has been successfully tested by independent testing firms to over 200 feet (60 meters) of hydrostatic water pressure, under both continuous immersion and wet/dry cycling.
VOLCLAY WATERSTOPPAGE GRANULA R SODIUM BENTONITE (50LB BAG)
Waterstoppage is chemically treated, granular sodium bentonite used as a detailing accessory product for CETCO Waterproofing Systems. When wetted, Waterstoppage forms into a dense, low permeable material that combines with the sodium bentonite in the waterproofing products to form a seamless waterproofing membrane.