Explore Our Complete Catalog
Browse our full range of products and specifications
DAYTON B-18 3/4" X 6" FLARED COIL LOOP INSERT
The load carrying capacity of any cast-in-place concrete insert is largely dependent upon the ability of the insert to draw upon the tensile strength of the mass of concrete within which it is embedded. The B18 Single Flared Coil Loop Insert makes effective use of this principle by increasing the depth and width of concrete embedment. B18 inserts are available with an optional B3 Screw-on Coil for use with the B30 Screw-on Plastic Cone which acts to set the insert back from the face of the concrete. Minimum spacing between inserts is twice the corner distance.
DAYTON F - 42 3/4" LTT INSERT - NC THREADS
The Dayton Superior F-42 Loop Ferrule Insert is fabricated by welding a looped strut to a closed-end ferrule. F-42 insert is available in the sizes shown in the chart and is well suited for structural connections and the suspension of equipment, piping, etc. Minimum spacing between inserts is twice the minimum corner distance.
DAYTON F-42 1/2" LTT INSERT - NC THREADS
NON STOCK The Dayton Superior F-42 Loop Ferrule Insert is fabricated by welding a looped strut to a closed-end ferrule. F-42 insert is available in the sizes shown in the chart and is well suited for structural connections and the suspension of equipment, piping, etc. Minimum spacing between inserts is twice the minimum corner distance.
DAYTON F-42 3/8" LTT INSERTS - NC THREADS
The Dayton Superior F-42 Loop Ferrule Insert is fabricated by welding a looped strut to a closed-end ferrule. F-42 insert is available in the sizes shown in the chart and is well suited for structural connections and the suspension of equipment, piping, etc. Minimum spacing between inserts is twice the minimum corner distance.
DAYTON F-42 5/8" LTT INSERT - NC THREADS
The Dayton Superior F-42 Loop Ferrule Insert is fabricated by welding a looped strut to a closed-end ferrule. F-42 insert is available in the sizes shown in the chart and is well suited for structural connections and the suspension of equipment, piping, etc. Minimum spacing between inserts is twice the minimum corner distance.
DECK-O-FOAM, 1/2" X 4"
50' PER ROLL
DECK-O-FOAM, 1/2" X 5"
50' PER ROLL
DECK-O-FOAM, 1/2" X 6"
50' PER ROLL
DECK-O-FOAM, 1/2" X 8"
50' PER ROLL