1" SBU ALL PLASTIC COATED

1" SBU PLAIN

Dayton Superior manufactures a complete line of rebar and/or mesh supports. All Dayton Superior rebar supports are manufactured to the recommendations or specifications of the Concrete Reinforcing Steel Institute (CRSI). Application: To support one layer of steel above another and space them to required distance. May also be used to support steel on soft material form surface, such as carton forms or fill material. Cover Height: 3/4" to 3", in 1/4" increments. Features: •Some sizes are available with corrugated top wire to serve as a guide for spacing reinforcing steel. •Available in plain, galvanized, stainless steel or epoxy-coated. •5-ft lengths standard. Other lengths available on special order.

1" SDS PLUS REBAR CUTTER

12" LENGTH

1" TO 2" MESH CHAIRS - 500 BOX

W/ BASE

1" TO 3" SBU EPC

OCM Slab Bolster Upper Epoxy Coated metal bar supports are used in commercial concrete projects to support upper and lower mats of reinforcing steel in elevated concrete decks, footings, slab on grade, slab on metal deck, bridge decks and other applications. Features Available in heights ranging from 3/4" to 6" in 1/4" increments. Manufactured in 60" Lengths. Epoxy Coating is done at approved coating suppliers within the United States with epoxy powder that is supplied by manufacturers that supply 100% Made in USA material. The epoxy powder meets the requirements of ASTM A775, AASHTOM254 and /or ASHTOM284 and is applied at a minimum thickness of 6 mils to satisfy the DOT requirements for all states. The Bar Supports supplied by OCM Inc. meet CRSI and "Buy America" requirements.

1" to 5-1/2" PLASTIC SNAP ON CHAIR

Rebar Support Chairs can be used for at grade or precast applications with the use of #3 through #5 rebar or post-tension cable. •Rod snaps easily into chair •Wide base allows chair to stand securely •Eliminates wire tying •Non-corrosive durable polypropylene •Non-conducive, perfect for bridge decks

1" X 1/2" EXPANSION CAP

SNAP-CAP provides a time and cost-saving method for forming straight, uniform and debris-free joints of the proper configuration, ready to seal. The top of SNAP-CAP pulls free and can be discarded. The exposed concrete surfaces assure balanced adherence to the sides. It is ideal for both horizontal and vertical concrete projects. SNAP-CAP is available in four widths.

1" X 10" BULLDOG XTREME

SDS-PLUS BIT

1" X 12" CHISEL ROUND/HEX

SHANK FOR SPLINE ROTARY HAMMER