Explore Our Complete Catalog
Browse our full range of products and specifications
SPECCHEM Cure & Seal 25 - 25% Solids Solvent- Based
Cure & Seal 25 is a VOC-compliant, non-yellowing acrylic polymer engineered to cure, seal, harden, and dustproof freshly placed concrete while enhancing the wearability and durability of aged concrete surfaces. Ready to use, dries quickly Cleans and brightens floors Reduces maintenance and clean-up costs Improves concrete’s resistance against deicing salts Non-staining Available in 55-gallon drums and 5-gallon pails.
SPECCHEM E-CURE - Water-Based Concrete Cure/Densifier
E-Cure® is a cutting-edge, clear concrete curing compound that addresses compatibility issues with flooring adhesives. It is designed for spray application to cure, harden, and dustproof concrete, ensuring proper strength development. E-Cure® creates a temporary membrane to enhance the concrete’s durability and is compatible with ASTM C309 Type 1D, Class A & B standards for moisture retention on hard-troweled surfaces. It may also contribute to LEED credits. Non-yellowing, Non-flammable/odorless/VOC Compliant Cure membrane dissipates in 3 – 5 days Resists acids, oils, greases, salts and tire marks USDA accepted, Certified for use to cure potable water structures Tested and certified to the performance requirements of NSF/ANSI 61 Independently adhesion tested compliant with thinset mortar and VCT by Tile Council of NA Available in 55-gallon drums and 5-gallon pails.
SPECCHEM LITHSEAL SC (Lithium Silicate Concrete Sealer/Densifier)
LithSeal SC is a premium lithium silicate sealer/ densifier/hardener for concrete surfaces. LithSeal SC deeply penetrates and reacts with cured concrete. This reaction produces a calcium silicate hydrate within the concrete pores. Treated surfaces will remain breathable reduce porosity, reduce dusting, reduce water permeability and increase abrasion resistance. When properly applied, LithSeal SC will not leave the whitish blush characteristic of other sodium silicate products. Reduce application costs with one step low pressure spray application Reduce dusting, porosity, water permeability. Improves abrasion resistance, light reflectance and gloss. Deeper penetrating then conventional silicates. Breathable, can be used interior and exterior. Fast-curing. Ready for traffic in one hour for most floors.
SPECCHEM NS Multi-Purpose Grout
Non-shrink non-metallic grout SC Multipurpose Grout is a non-shrink, non-metallic multi-purpose cement-based grout. SC Multipurpose Grout is formulated for a wide variety of grouting applications, from damp pack to flowable through a controlled, positive expansion. Controlled positive expansion for maximum effective bearing Non-metallic / non-corrosive Pourable / pumpable versatility Excellent freeze / thaw resistance Natural concrete gray Chloride and gypsum free Available in 50 lb bags, yielding approximately 0.45 cu. ft. in fluid condition. An addition of 50% by weight of 3/8” pea stone increases yield to approximately 0.59 cu. ft.
SPECCHEM ORANGE PEEL / CITRUS CLEANER - Citrus-based solvent & degreaser
Orange Peel is a cost effective, natural citrus solvent, cleaner and degreaser. Orange Peel is an innovative solution for the toughest industrial applications. Orange Peel will effectively remove grease, grime and other contaminants from architectural concrete and other surfaces ORANGE PEEL can also be used to remove asphalt from tools or paving machines and dissolve/strip many types of carpet and tile cutback adhesives safely and effectively. VOC compliant (check local regulations). Refreshing citrus odor. Effective at removing tough stains without the hazards of traditional solvents. Available in 55-gallon drums, 5-gallon pails, and 1-gallon jugs (4 per case).
SPECCHEM Precision Grout Green Conscious Product Non-shrink non-metallic grout
SC Precision Grout is a high-flow, non-shrink, non-metallic, cement-based grout engineered for precision grouting applications. Its formula accommodates a wide range of grouting applications, from plastic to fluid consistencies, through controlled, positive expansion. It’s designed for effective load bearing in high-flow precision grouting tasks. High flow with early high compressive strength. Reduces project downtime. Controlled positive expansion ensures optimal load bearing. Non-metallic and non-corrosive. Versatile for pouring or pumping. Excellent freeze/thaw resistance. Can be extended with pea stone for deep applications. Thermal shock resistant. USDA accepted.
SPECCHEM REPCON 928 - Polymer-Modified Rapid-Setting Concrete Repair Mortar With Corrosion Inhibitor
RepCon 928 is a single-component, polymer-modified, fiber-reinforced, rapid-setting concrete repair mortar with corrosion inhibitor for horizontal and formed vertical use on concrete floors, highway pavements, bridge decks, and other applications requiring early resumption of traffic or use. One-component, dry-polymer modified. Just add water. Fiber-reinforced for early integral strength Air entrained for excellent freeze-thaw durability Takes foot traffic in 1 hour after final set Long work time for hot weather applications (available in fast-set version RepCon® 928 FS) Available in 50 lb bags or 3,000 lb SuperSacks, offering approximately 20 sq-ft coverage at 1/4 inch per 50 lbs.
SPECCHEM REPCON V/O - Single Component Polymer-Modified Concrete Repair Mortar With Corrosion Inhibitor
RepCon® V/O O is a single-component, polymer-modified, fiber-reinforced concrete repair mortar with integral corrosion inhibitor for use in a variety of horizontal, vertical, and overhead repair applications. RepCon® V/O incorporates the latest in polymer technology, offering superior durability, performance and ease of application in industrial, commercial, and infrastructure/DOT applications. One-component dry polymer-modified, just add water Fiber-reinforced for excellent strength and freeze thaw durability Hand-applied or spray applied for large projects Easy-to-apply/finish consistency up to 2” Contains integral corrosion inhibitor
SPECCHEM REPCON-H - Single-Component Polymer-Modified Concrete Repair Mortar with Corrosion Inhibitor
RepCon® H is a single-component, polymer-modified, fiber-reinforced concrete repair mortar with an integral corrosion inhibitor. It is ideal for various horizontal repair applications including form/pour, screed, or trowel down methods. Utilizing the latest polymer technology, RepCon® H offers superior durability, performance, and ease of application in industrial, commercial, and infrastructure settings. One-component, just add water. Fiber-reinforced for added strength. Utilizes dry-polymer technology for excellent freeze-thaw durability. Flowable and pumpable consistency for easy application. Contains integral corrosion inhibitor. Suitable for various horizontal and vertical form/pour concrete repairs and overlays. Natural concrete-gray color. 50 lb bags, covering approximately 20 sq-ft at 1/4? thickness.