Explore Our Complete Catalog
Browse our full range of products and specifications
15" X 15" POLY TAMP FOR DECORATIVE CONCRETE STAMPS.
Brickform Aluminum Handle Pounders are designed with a flexible head that reduces fatigue on the neck and shoulders, while achieving optimum detail on the concrete surface. Lightweight Detachable handle Flexible base FP-500, 15? x 15?, 18 lbs
BRICKFORM ANTIQUE RELEASE
Add depth and dimensions to stamped concrete while preventing pull-up and reducing wear on texturing tools. Antique Release serves as a bond breaker and keep stamps from sticking to the surface of the concrete. At the same time, it adds antiquing and highlighting for more realistic, attractive stamped hardscapes. Antique Release Specifications 30 lb. 5 gal. pails Approx. 28 ft2 per lb. Prevents concrete buildup Prolongs tool life 42 Standard Colors Custom colors available Unlimited effect and color combinations Bond breaker and release agent Antiquing and highlighting agent
BRICKFORM CLEAR LIQUID RELEASE
Brickform Liquid Release is a colorless release agent formulated and recommended for use with Brickform texture mats or concrete stamping tools. Liquid Release for stamped concrete forms a barrier that prevents imprinting tools from sticking to the concrete surface during the stamping process. It is commonly used on interior applications in place of powdered release or where final projects require topical stains or coatings. 1 gal. or 5 gal. 150 to 250 square feet per gal. Clear liquid with little/no residue Easy to apply on freshly poured concrete Apply with a pressurized or pump-up sprayer Solvent-based Interior or exterior applications Liquid release agents minimize wear on texturing tools
Brickform E-Etch (Concrete Cleaner & Etcher)
Brickform E-Etch is an environmentally friendly industrial strength floor cleaner, degreaser and light etching product. It is ideal for cleaning and preparing cementitious surfaces for acid staining, decorative overlays, water-based stains, and coatings applications. It may also be used on concrete, stucco, terrazzo and most masonry surfaces to open up the pores on the surface and clean grime, dirt, grease, scuff marks and stains. E-Etch effectively removes excess Antique Release from textured concrete and can also be used as an efflorescence remover. 1 gal. bottles 250 ft2 per gallon; undiluted usage Can be diluted for less aggressive etching and cleaning Non-hazardous and VOC compliant Biodegradable Rinse with water Non-abrasive and non-carcinogenic Antique Release / efflorescence remover
DAY 1 FINISHING AID - RTU
DAY1® Finishing Aid Brickform DAY1 is a colloidal silica-based finishing aid that makes concrete flatwork finishing easier and faster. It produces a better result and reduces the risk of a prematurely setting slab. Applied during floating and troweling, DAY1 finishing aid increases cream and extends workability under adverse conditions such as high wind, heat, or low humidity. It eliminates the need to add water to the surface which can lead to premature surface failure. DAY1 does not alter the water-to-cement ratio and becomes a permanent part of the slab so there is no membrane or residue to remove.
SOLOMON POWDERED INTEGRAL COLOR
Powdered Integral Color is the simple, cost effective way to color concrete. Easily dose color on the jobsite or at Ready Mix plants. Create consistently and uniformly colored concrete using Solomon Colors Powdered Integral Color. Solomon Colors Powdered Integral Color is ASTM C979 compliant. It is free of extenders and fillers for consistent, brilliant color at lower loadings than the competition. Powdered Integral Color will not react with atmospheric conditions, wash out, or fade when properly mixed and dosed.