ANCHORIT INJ PORT

Injection port to be used with LR-321 epoxy resin..

CRACK-KIT CRACKBOND, CRACK INJECTION AND CONCRETE REPAIR

INCLUDES Contains everything needed to structurally repair 8-10 feet of crack Reliable high strength contractor grade formulas Convenient packaging Easy to follow instructions CRACKBOND LR-321 Low viscosity – 500 cP ASTM C881 Type I, II, IV & V Grade 1, Class C; AASHTO M235 MIRACLE BOND REPAIR EPOXY Easily dispensable with most caulking guns VOC compliant, 1:1 mix ratio epoxy Moisture insensitive system and may be used on damp surfaces

CRACKBOND LR-321 CONCRETE REPAIR EPOXY 16oz.

CRACKBOND® LR-321 family products are two-component, high modulus structural epoxy formulations designed to repair cracks in concrete. Due to their ultra-low viscosities, LR-321 and LR-321LPL are perfect for gravity-feed repair of fine to medium size cracks. LR-321G, however, has a thixotropic gel-like consistency, and is ideal for medium blind-side crack repair, as it flows when under pressure and gels once injection stops. The usable temperature range is between 50 °F and 100 °F (10 °C and 38 °C).

CRACKKIT MANUAL DISPENSING GUN

INJECTION NOZZLE KIT FOR LR321

Injection kit includes: 3 mixing nozzles 3 black flow control ports

MIRACLE BOND 1310 - 9oz SINGLE

MIRACLE BOND® 1310 is a multi-purpose, rapid cure, epoxy bonding and repair adhesive. Its specially formulated, non-sag property is ideal for bonding most materials together and is perfect for both overhead and vertical repairs, while still easily dispensed from most caulking guns. It has an application temperature range between 40 °F (4 °C) and 100 °F (38 °C).

NON-EXPLOSIVE CRACKING AGENT, THE CRACKER

The Cracker is a non-explosive cracking agent that can crack any hard rock or reinforced concrete. The Cracker is a universal product which may not only be substituted for explosives, hydraulic wedges, rock-breakers, and concrete-crackers, but can also be used in many places where other methods are impractical. Produced in powder form, The Cracker need only be mixed with water and poured into predrilled holes for dramatic results. General Uses •Near Historical Buildings Hospitals •Tunnels •Bank Vaults Advantages and Features •SAFE — Above all, The Cracker provides a remarkably high safety factor as compared with explosives and other demolition methods. When used properly, both flyrock and vibration are eliminated. •EASY — No permits or special pre-conditions are necessary for its use or transportation •QUIET — Ideal for use in or near occupied buildings. The Cracker requires no heavy machinery and involves no blasting •NON-TOXIC — The Cracker is a lime-based product and is completely safe for the environment. As it is 100 percent biodegradable in its final form, unused material may simply be poured into the ground or diluted with cool water. •ECONOMICAL — As the flyrock characteristic of most demolition methods is eliminated with The Cracker, little or no cost is incurred for dust and debris containment. Labor requirements for application are also minimal.

NOZZLE 5/8" X 15"

ULTRABOND HS-1CC HIGH STRENGTH ANCHORING EPOXY

ULTRABOND® HS-1CC is a code compliant, two-component, 1:1 mix ratio by volume, high performance epoxy anchoring system approved for use in cartridges and in bulk with threaded rod and reinforcing bar for cracked and uncracked concrete conditions, and internally threaded inserts in uncracked concrete in accordance with ACI 355.4 and ICC-ES AC308. It has an extended application temperature range between 43 °F and 110 °F (6 °C and 43 °C) for structural applications per ICCES ESR-4094 and between 38 °F and 125 °F (3 °C and 52 °C) for transportation infrastructure applications to AASHTO M235 & ASTM C881.