W.R. MEADOWS SEALTIGHT POINTING MASTIC (5 GALLON)

POINTING MASTIC is a pre-mixed, cold-applied, polymeric, single-component sealing compound. POINTING MASTIC was specifically designed to seal all exterior, vertical, and horizontal terminations of MEL-ROL®, PRECON®, MEL-DEKTM, AIR-SHIELDTM, PERMINATOR®, and PREMOULDED MEMBRANE® VAPOR SEAL WITH PLASMATIC® CORE from W. R. MEADOWS. It is also used for adhesive bonding of PROTECTION COURSE and MEL-DRAINTM. POINTING MASTIC can be used on all patches and overlaps in detail areas. It offers excellent cohesive and adhesive qualities when applied to structural concrete, masonry, and/or wood. Once applied, it provides excellent adhesive and bonding strengths. POINTING MASTIC cures to form a tough, flexible membrane.

W.R. Meadows VOCOMP-20 WATER BASED CURE & SEAL

VOCOMP-20 water-based acrylic curing and sealing compound is formulated using special acrylic polymers in a true water-based carrier. Once properly applied, VOCOMP-20 provides a durable film for efficient moisture retention. VOCOMP-20 appears milky white in the container and, when first applied, leaves a bluish cast on the concrete for easy visual confirmation of coverage. VOCOMP-20 dries clear to provide a transparent sheen finish. The sheen can be controlled by the number of coats applied. VOCOMP-20 resists yellowing from ultraviolet exposure and provides a durable, long-lasting finish that offers improved resistance to chemicals and wear. 1 Gallon (3.79 L) Units (4 per case) 5 Gallon (18.93 L) Pails 55 Gallon (208.20 L) Drums

WACKER 2" TRASH PUMP 5.5HP

HONDA ENGINE

WACKER, 3"H.D.TRASH PUMP PT3A

CENTRIFIGAL HONDA 8HP

WALKING BRASS GROOVER, 1"X1/2"

WALKING GROOVER•Belt polished surface for cutting clean and smooth sharp grooves •Long wearing one-piece bronze with turned up end Item ID CC314 Weight 4.00 LB Length 6 in. Width 4.5 in. Radius 1/4 in. Bit Depth 1- in. Bit Width 1/2 in. Handle 60IN WOOD CLEVIS STYLE Bracket CAST IN LUG

WARNING FLAG 18X18

WARNING LASER IN USE 14" X 10"

WARNING SIGNS are used where a situation indicates a potentially hazardous situation which, if not avoided, could result in DEATH or SERIOUS INJURY. Should not be considered for property damage accidents unless personal injury risk is present. All employees shall be instructed that WARNING SIGNS indicate a potential hazard for which proper precautions should be taken. The sign should contain sufficient information to be easily understood. OSHA 1910.145(e)(2). Signs are .063 aluminum and reflective

WATCHMAN 2 LOCK CLIPS W/BOLTS

WATCHMAN III LOCK TAB W/BOLT